From a wide variety of processing machinesMetal pressure can be distinguished by a hydraulic press manual. This device for the treatment of metals by pressure with a hydraulic drive, in which the liquid is under high pressure.
With the help of such a device, the method of cutting through the contour can produce details of the most complex shape.To do this, in a closed form, which is calledcontainer, polyurethane is placed. A template is placed on top - a copy of the part to be obtained. By means of a hydraulic drive, applying force to the slider, we obtain an imprint of the finished part on the workpiece. With further pressure, the template cuts the part along the contour. The only thing that such parts should not exceed the metal thickness of 1.2 mm.
The field of application in which a manual hydraulic press is used is very large:
- in metalworking (forging, stamping, bending, straightening, extrusion of pipes);
- pressing of powder materials;
- production of rubber and plastic products;
- production of plywood and textolite.
When working, the force should not exceed 35 tons.
Hydraulic manual press became one of theirreplaceable self-made machine tools in the home workshop. Its main advantages are low price and small dimensions. With minimal energy resources, it is possible to obtain stamped details of complex shape: by cutting along the contour, punching holes, drawing all kinds of caps, and fixing connections and the like.
The manual hydraulic press has received a wide application for crimping cable lugs of sleeves in those places where the cable is connected to aluminum or copper veins of power supply networks.After performing this operation, the productis marked with numbers, which corresponds to the cross-sectional area of the cable and the press mark intended for a particular type of connection. The crimping is performed by a hexagonal (hexagonal) method.
Press hydraulic hand crimpingcable tips in strict compliance with the marking to prevent tool breakage. For this, a plastic case with a set of hexagonal matrices is supplied with the product.
A large application of hydraulic hydraulic pressreceived in car repair shops and service stations. In this case, this device is a small device that creates a high pressure at any point of the car, for example, to straighten the body of the machine.
You can use it to seal, squeeze outunnecessary liquid. Ideally suited are manual presses for locksmith work when fixing an electric motor, fitting bushings, installing gears or dismantling them, bending small parts, pressing bearings and other press work.
The press is a compact metala structure that consists of racks, lower and upper beams, a frame and a hydraulic drive with a pump and a manometer. The frame is made of profiled steel with a welded rigid structure, which makes it possible to install such a product in any convenient position. To monitor the force generated during operation, a sensor is attached.
Such a convenient and practical adaptation can make for yourself any home master.