Learning to iron things

Learning to iron things

Ironing, perhaps the most tedious of all household chores, of course, modern irons and steamers greatly simplify the task, but you still have to tinker around the ironing board with a pile of linen after washing. If you do not yet have a wife or girl who is ready to do all the housework without requiring a stamp in your passport (there are not very many of them), then you should learn some rules that can facilitate this ungrateful work.

smooth things

General Ironing Rules

    1. To keep the fabric from slipping, ironing is better on the ironing board, in extreme cases, use a table covered with a blanket.
    2. Try not to overdry the laundry, if this was not avoided so that it was easier, slightly dampen the fabric with water (you can spray it with a spray for watering the flowers).
    3. It’s better not to iron a dirty thing at all - if there is a stain on clothes, after treatment with an iron, it will be very difficult to remove it.
    4. Carefully read the labels on clothes. There is always an indication of what mode you need to iron this or that thing.
    5. After the end of the process, do not put everything on the shelves at once, let the laundry lie down for several hours.

Video lesson

Shirts

A shirt is the face of a man, but a rare peasant undertakes this difficult task, and even more so, brings it to the end, but women do it, it means that everything is not that difficult! Answering the question how to spoil a shirt, it can be noted that here it is necessary to observe a certain sequence:

smooth things

  • So, at first the collar is ironed off, on both sides it is ironed in expanded form.
  • Then, with a hot iron, gently pass over the back of the shirt from the collar to the bottom border.
  • The most difficult thing is to smooth the sleeves. It is desirable to achieve sleeves on which there will be no fold - this is considered to be a bad form; to help yourself, you can use a dosochka for sleeves, on which, directly putting on a sleeve, it will be very easy to iron out from all sides. Do not forget to thoroughly treat the cuffs with a hot iron, to do this, unbutton all the buttons and, having unfolded the cuffs completely, iron them on both sides.
  • Smoothing the shoulders, go to the front halves, smooth the fabric of the shirt from top to bottom with straight motions. Try to smooth the armhole and the fabric between the buttons.

If the process is complicated, the fabric does not give in well and remains mint, moisten the shirt with water (just a few drops), or repeat the procedure through a damp cloth.

Stroking shirt video instruction

Trousers

Such a responsible matter, like trouser ironing, must begin with work on internal details. Turn the pants inside out, and iron the pockets and inner seams. After that, we return the pants to their original position, that is, on the face, and through the damp cloth we iron the upper half to the pants, including the belt. Now go to the bottom, gently fold the pants so that all the longitudinal seams match and put them sideways on the ironing board. We start ironing with the lower trouser, for which we fold the upper one to the side, then turn over the pants, and do the same with the second leg. The last stage - the formation of arrows, if you do not know,how to iron trousers with arrows, we hasten to inform, in order to get a good tough arrow, it is necessary to mark its line with soap on the wrong side, and from the front side to iron it thoroughly through a damp cloth. In this case, both legs must be combined, and ironed together, in more detail we tell in our article - https://world-mans.ru/kak-nauchitsya-pravilno-gladit-bryuki.html.

Master Class

Blazer

It is much more difficult to iron a jacket than trousers, you have to be patient, turn on the iron and get to work, but to make it all right the first time, we have done a very detailed article for you - https://world-mans.ru/uchimsya- pravilno-gladit-pidzhak.html.

  1. The jacket begins to be stroked from the front half, prepare a damp cloth in advance, adjust the lining on the wrong side so as not to get unnecessary folds. Turn out the pockets, iron them and return to the starting position.
  2. The next step is to iron the sleeves, a small board from the ironing set is ideal for this work, put the sleeve on it, and carefully iron it from all sides. If you do not have this device, align the sleeve along the seam, and start stroking from edge to shoulder. Remember that there should be no bends and folds on the sleeve.
  3. The shoulders, back and front halves are smooth by smooth straight movements from top to bottom, and go to the collar and lapels. These details of the jacket are ironed first from the front side, and the inside is ironed at the very end of the procedure.
  4. The last stage - ironing the seamy side. First, the shoulders are ironed, then the front and back halves, in the end we return to the collar and lapels.

smooth things

Another small piece of advice: if after ironing a jacket you notice a not very beautiful shine here and there, you can get rid of it forever by ironing the damaged place through wool fabric and a wet chopper.This simple method will help to quickly deal with the identified problem.

T-shirts

There are many types of men's T-shirts, cotton and synthetic, with drawings and inscriptions, with rubber logos that can melt from a hot iron, etc. Therefore, whatever a T-shirt may be, it should always be ironed from the wrong side. Use the ironing board, and pull the T-shirt over it, smoothing the fabric, so you can avoid the appearance of folds from the opposite side. The sleeves are very comfortable and quickly smoothed out on a small additional board. However, if time does not tolerate, you can expand the T-shirt on the surface of the ironing board, and iron one and the other side alternately.

smooth things

Jeans

You can iron not all models of jeans, some can simply be dried, gently straightening, in an upright position. If you don’t find such in your wardrobe, you will have to learn to be friends with an iron. To keep jeans in color as long as possible, they are always stroked from the wrong side.

Learning to iron things images, pictures

Related news

  • And a fur coat to eat, and in a dress to get into: how not to get better for the holidays
  • 7 problems that each pair inevitably faces
  • Jennifer Aniston'
  • I kept my chastity before the wedding and now I can’t have sex with my husband
  • MERCEDES-BENZ S class (W221)

  • Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things

    Learning to iron things